V-belt Optibelt 10 x 825 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10 x 825 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10 x 825 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile Z with a length of 825 mm. It is used on industrial drives where a classical V-belt cross-section is specified, and the marking 10 x 825 Li identifies the belt on the shelf or in the manual.
Classical V-belts in profile Z are common on light-duty drives such as small fans, pumps, compressors and machine tools. To confirm fit, read the belt that is being replaced: the profile and the length are the two values that must match. This belt carries the code 10 x 825 Li, so the replacement should show the same profile and the same 825 mm length.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 825 mm, and check that the pulley groove accepts a Z profile. A belt that is too long or too short will not tension correctly, and a different profile will not sit properly in the groove.
When you request a quote, send the part number 10 x 825 Li and the quantity needed. If you are unsure whether this is the correct belt for the drive, include the pulley diameters and the center distance, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- Z
- Length
- 825mm
Frequently asked questions
- What does the code 10 x 825 Li mean on this Optibelt belt?
- The code identifies the belt as a classical V-belt in profile Z with a length of 825 mm. The profile and length are the key values to match when replacing a belt.
- How do I confirm this belt fits my drive?
- Check the old belt for the same profile and length, and make sure the pulley groove is made for a Z profile. If the marking is not clear, measure the outside length and compare it to 825 mm.
- What should I send to get a quote for this belt?
- Send the part number 10 x 825 Li and the quantity you need. If you want help confirming the fit, include the pulley diameters and the center distance of the drive.