V-belt Movendis P-SPZ1950
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1950 and any equivalents.
The Movendis P-SPZ1950 is a narrow wedge V-belt with an SPZ profile and a 1950 mm length. It measures 9.7 mm across the top, stands 8 mm high, and has a 40-degree angle. When you need to replace a belt on a driven machine, start by reading the marking on the back of the old belt.
The marking on the back of a belt gives you the profile and the length in one line. On this Movendis belt, the marking identifies it as an SPZ profile with a 1950 mm length. Copy that marking exactly, including any prefix, and send it with your quote request. That single line is usually enough for our team to confirm the right belt or suggest an equivalent.
If the old marking is worn, measure the belt and note the profile. This belt has a 9.7 mm top width, an 8 mm height, and a 40-degree angle. Those dimensions belong to the SPZ profile. A belt that is too wide or too narrow will not sit correctly in the pulley groove, so matching the profile matters as much as matching the length.
For a quote, send the part number P-SPZ1950, the marking from the old belt, or the profile and length. If you are replacing more than one belt on the same drive, include the quantity and the position. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1950mm
Frequently asked questions
- How do I read the marking on the back of the old belt?
- The marking usually shows the profile and the length. On this belt, that is SPZ and 1950 mm. Write down the full marking, including any prefix, and send it with your quote request.
- What if the marking on the old belt is no longer readable?
- Measure the top width, height, and length, and note the profile if you can. This belt has a 9.7 mm top width, an 8 mm height, and a 1950 mm length. Send those figures and we can help confirm the right belt.
- What do you need to quote the Movendis P-SPZ1950?
- Send the part number P-SPZ1950, or the marking from the old belt, or the profile and length. Include the quantity if you are replacing more than one belt on the same drive. We reply by WhatsApp or email.