V-belt Movendis P-SPZ1937
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1937 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1937 and any equivalents.
The Movendis P-SPZ1937 is a narrow wedge V-belt with an SPZ profile and a length of 1937 mm. When you are replacing a belt, matching the profile and length on the old belt is the first step. This page covers how to confirm that match before you request a quote.
Start with the marking on the belt you are replacing. A narrow wedge V-belt carries its profile and length on the back, so compare the SPZ profile and the 1937 mm length directly with the Movendis P-SPZ1937. If the old belt is worn or the marking is gone, measure the top width and height to confirm the cross-section: this belt has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle.
The profile and length are what locate the correct belt in a drive. SPZ is a narrow wedge profile, and 1937 mm is the datum length for this part. If your drive uses more than one belt, note how many are on the sheaves and plan to replace the set together so the belts share the load evenly. Check the sheave grooves for wear while the belt is off.
If you are unsure whether the Movendis P-SPZ1937 is the right replacement, send the belt marking, the profile, the length and the drive details to our team. We carry Movendis narrow wedge V-belts and can confirm the match or suggest an equivalent from the data you provide.
Dimensions
- Section
- SPZ
- Length
- 1937mm
Frequently asked questions
- How do I confirm the P-SPZ1937 matches the belt I am replacing?
- Read the marking on the back of the old belt. The profile should be SPZ and the length should be 1937 mm. If the marking is unreadable, measure the top width and height: this belt is 9.7 mm wide and 8 mm high, with a 40-degree angle.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replace the full set at the same time so the belts work together. Mixing a new belt with worn belts can put more load on the new one. Confirm the number of belts on the drive before ordering.
- What information do I need to request a quote for this belt?
- Send the part number P-SPZ1937, the profile SPZ, the length 1937 mm and the quantity you need. If you are matching an existing belt, include the marking from the old belt. Our team will confirm the belt or suggest an equivalent.