V-belt Movendis P-SPZ1900
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1900 and any equivalents.
The Movendis P-SPZ1900 is a narrow wedge V-belt with an SPZ profile and a 1900 mm length. It is used in industrial drives where a compact cross-section is required to transmit power between pulleys. The 40° angle, 9.7 mm top width and 8 mm height define its fit in the pulley groove.
Narrow wedge V-belts like this SPZ-profile belt are common on fans, pumps, compressors and other driven equipment in plants, shops and process lines. The 1900 mm length is the datum to match when replacing an existing belt. Confirm that the old belt is marked SPZ and measures 1900 mm before ordering.
To verify fit, check the pulley groove width and the belt cross-section. This belt has a 9.7 mm top width and 8 mm height, with a 40° angle. If the drive uses multiple belts, inspect all of them and replace as a set so the load stays even across the grooves. Look for cracking, glazing, missing cords or uneven wear on the flanks.
When you request a quote, send the part number P-SPZ1900 and, if you have it, the marking on the back of the old belt. If the marking is worn or unreadable, measure the outside length and note the pulley diameters and groove profile. Our team can confirm the SPZ profile and 1900 mm length against your drive details and help you identify the correct replacement.
Dimensions
- Section
- SPZ
- Length
- 1900mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge profile. This belt has a 9.7 mm top width, 8 mm height and 40° angle. Match those dimensions and the 1900 mm length to the pulley groove and the old belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows SPZ and 1900 mm, this belt matches. If not, measure the outside length and check the pulley groove profile before ordering.
- What should I send to request a quote?
- Send the part number P-SPZ1900. If you are replacing an unmarked belt, include the outside length, pulley diameters and groove profile so we can confirm the fit.