V-belt Movendis P-SPB2900
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2900 and any equivalents.
The Movendis P-SPB2900 is a narrow wedge V-belt in the SPB profile with a 2900 mm length. This belt type is common on industrial drives where a compact cross-section carries the load, such as pumps, fans, compressors and process machinery. Confirm fit by matching the profile and length to your drive's pulley grooves and center distance.
The SPB profile is defined by its 16.3 mm top width, 13 mm height and 40° angle. These dimensions let the belt sit correctly in the pulley groove, so the flanks transmit power rather than the belt bottoming out. Because a narrow wedge belt runs in a specific groove size, the profile must match the pulleys on the drive.
The 2900 mm length is the datum length for this belt. To confirm it is the right replacement, read the marking on the back of the old belt and compare the profile and length. If the old belt is worn or the marking is unreadable, measure the drive and check the pulley groove profile before ordering.
When you request a quote, send the part number P-SPB2900 and, if possible, the machine or drive reference. For drives using multiple belts, replace the full set at the same time so the load stays evenly distributed across the grooves. If the exact belt is not what you need, we can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 2900mm
Frequently asked questions
- How do I confirm the P-SPB2900 fits my drive?
- Check that the pulleys take an SPB profile and that the belt length matches your drive's required length. The marking on the back of the old belt is the quickest reference.
- What are the dimensions of this belt?
- It has a 16.3 mm top width, 13 mm height, 40° angle and a 2900 mm length.
- What should I send to get a quote?
- Send the part number P-SPB2900 and the quantity you need. If you have the machine or drive details, include those so we can help confirm the belt.