V-belt Movendis P-SPB2850
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2850 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2850 and any equivalents.
The Movendis P-SPB2850 is a narrow wedge V-belt built to the SPB profile. Its 2850 mm length, 16.3 mm top width and 13 mm height make it a direct match when replacing a worn belt of the same marking. Use the numbers on the old belt to confirm the replacement.
Start by reading the marking on the back of the belt you are replacing. Confirm the profile is SPB and the length is 2850 mm. Check the top width of 16.3 mm and the height of 13 mm against the old belt, and verify the 40° angle. If the old belt is unreadable, measure its length and cross-section and send those values with your request.
The P-SPB2850 is a narrow wedge V-belt. It is not a cogged, banded, double-V or variable speed belt. When you request a quote, include the part number P-SPB2850 and the machine or drive it serves. Our team can confirm the belt or suggest an equivalent.
Before installing, inspect the drive. Check sheave grooves for wear, alignment and cleanliness. Replace belts in sets when the drive uses multiple belts, and re-tension after the first run-in period. Keep the old belt for comparison until the new one is seated.
Dimensions
- Section
- SPB
- Length
- 2850mm
Frequently asked questions
- How do I confirm the P-SPB2850 is the right belt?
- Read the marking on the old belt. It should show SPB and 2850. Also check the top width of 16.3 mm, the height of 13 mm and the 40° angle. If the marking is gone, measure the old belt and send the dimensions with your request.
- What should I send to request a quote?
- Send the part number P-SPB2850, the quantity, and the machine or drive it is used on. If you are replacing a different belt, include the old belt's profile and length so we can confirm the match or suggest an equivalent.
- Does this belt need any special handling?
- No special handling beyond standard V-belt practice. Inspect sheaves for wear and alignment, install without forcing the belt over the grooves, and re-tension after the first run-in period. Replace all belts in a multiple-belt drive as a set.