V-belt Movendis P-SPB2950
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2950 and any equivalents.
The Movendis P-SPB2950 is a narrow wedge V-belt in the SPB profile with a length of 2950 mm. It measures 16.3 mm across the top, 13 mm in height, and has a 40-degree angle. Use these figures to match it against the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows SPB and 2950, the P-SPB2950 matches on profile and length. Also check the belt's condition: look for cracks, glazing, missing ribs, or a shiny sidewall, and inspect the sheave grooves for wear.
If the marking is worn away, measure the top width and the height of the old belt and compare them with the 16.3 mm top width and 13 mm height of the P-SPB2950. Measure the length along the belt's path, or use the length stamped on the old belt, and check it against 2950 mm.
When a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Send the part number, the belt marking, or your measurements to MR by WhatsApp or email for a quote.
Dimensions
- Section
- SPB
- Length
- 2950mm
Frequently asked questions
- How do I confirm the P-SPB2950 is the right belt?
- Check the old belt's marking for the SPB profile and 2950 mm length. If the marking is gone, measure the top width (16.3 mm), height (13 mm), and length, and compare them with the P-SPB2950.
- What should I send to request a quote?
- Send the part number P-SPB2950, or the marking from the old belt. If the marking is unreadable, send the profile, top width, height, and length you measured.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set together so the belts wear and carry the load evenly.