V-belt Movendis P-SPB2840
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2840 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2840 and any equivalents.
When a drive goes down, the fastest way to identify the right replacement is to read the marking on the back of the old belt. This page covers the Movendis P-SPB2840, a narrow wedge V-belt in the SPB profile with a length of 2840 mm. Match those characters to your drive and you have the belt you need.
The P-SPB2840 is an SPB profile narrow wedge V-belt measuring 2840 mm in length, with a top width of 16.3 mm, a height of 13 mm and a 40 degree angle. Narrow wedge belts like this one transmit more power in a given sheave width than a classic V-belt, which is why they are common on industrial drives where space is tight and loads are steady. Confirm the profile and the length against the old belt before ordering.
Old belts often lose their legibility before they fail, so read the marking while the belt is still intact. Look for the SPB profile and the 2840 mm length, and compare the top width and height if the print has worn away. A belt that has been run for a long time may also be stretched or glazed, so measure the drive rather than relying on the worn belt alone.
If the marking is unreadable, send us a photo of the belt and the sheave, or the drive details from your equipment. The team can confirm the profile and length and suggest an equivalent where one exists. We reply by WhatsApp or email with a quote based on the part number you provide.
Dimensions
- Section
- SPB
- Length
- 2840mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The back of the belt carries the profile and the length, in this case SPB and 2840 mm. Those two values are what you match to the drive. If the marking is worn off, measure the top width and height of the belt and check the sheave groove.
- Can I replace a worn belt with the same part number?
- Yes, if the old belt is marked P-SPB2840 and the drive has not been modified. On multi-belt drives, replace all belts in the set at the same time so the load stays even across the grooves.
- What should I send for a quote?
- Send the part number P-SPB2840, or the profile and length from the old belt, by WhatsApp or email. A photo of the belt marking and the sheave helps us confirm the match before we quote.