V-belt Movendis P-C101
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C101 and any equivalents.
The Movendis P-C101 is a classical wrapped V-belt in the C profile. It measures 2565 mm in length, with a 22 mm top width, 14 mm height and a 40° angle. This belt is used on industrial drives where a classical cross-section is specified.
To confirm fit, compare the marking on the old belt with the P-C101 part number and check the profile and length against the drive. The C profile is identified by the 22 mm top width and 14 mm height; the 2565 mm length and 40° angle must match the pulley groove and the required belt path. If the old belt is worn or the marking is unreadable, measure the outside length and the top width before ordering.
Classical wrapped V-belts are commonly found on fans, pumps, compressors and other general industrial machinery. The wrapped construction suits drives where the belt runs over standard V-grooved pulleys. For drives using multiple belts, replace all belts in the set at the same time so the load is shared evenly.
We carry the Movendis P-C101. To request a quote, send the part number, the quantity and the drive details by WhatsApp or email. If you are unsure whether this belt fits, include a photo of the old belt marking and the pulley grooves, and our team can help confirm the right belt.
Dimensions
- Section
- C
- Length
- 2565mm
Frequently asked questions
- How do I confirm the P-C101 fits my drive?
- Check the old belt marking for the part number, then verify the C profile (22 mm top width, 14 mm height), the 2565 mm length and the 40° angle against your pulleys and drive layout.
- What should I send to get a quote for the P-C101?
- Send the part number P-C101, the quantity you need, and any drive details or photos of the old belt. You can reach us by WhatsApp or email.
- Can I replace just one belt on a multi-belt drive?
- For drives using multiple belts, it is best practice to replace all belts in the set at the same time so they share the load evenly.