V-belt Movendis P-C100
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C100 and any equivalents.
The Movendis P-C100 is a classical wrapped V-belt with a C profile and a length of 2540 mm. It measures 22 mm across the top and 14 mm in height, with a 40-degree angle. To get a quote, send the part number and the details of the drive it runs on.
When you request a quote for the P-C100, include the belt marking and the drive information. The marking on the back gives the part number and size. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the sheave groove profile and the number of grooves. A photo of the belt and the drive nameplate helps confirm the correct replacement.
This belt is part of the Movendis Classical Wrapped V-Belts series. It has a C profile, a 2540 mm length, a 22 mm top width, a 14 mm height, and a 40-degree angle. Use these values to match the old belt. If the drive uses multiple belts, replace them as a set so the load stays even across the grooves.
Send your quote request by WhatsApp or email with the part number P-C100 and the drive details. The team replies promptly and can help confirm the right belt or suggest an equivalent. For drives that run several belts, list the quantity you need so the set is matched.
Dimensions
- Section
- C
- Length
- 2540mm
Frequently asked questions
- What information should I send with a quote request for the P-C100?
- Send the part number P-C100 and the drive details: the belt marking, the outside length if the marking is gone, the sheave groove profile, the number of grooves, and the quantity. A photo of the belt and the drive nameplate helps confirm the match.
- How do I confirm the P-C100 is the right belt for my drive?
- Check the profile and length against the old belt. The P-C100 has a C profile, a 2540 mm length, a 22 mm top width, a 14 mm height, and a 40-degree angle. If the old belt is worn, measure it and compare these values.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a drive that uses several belts, replace them as a set so they share the load evenly. Include the total quantity in your quote request.