V-belt Movendis P-C102
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C102 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C102 and any equivalents.
The Movendis P-C102 is a classical V-belt in the C profile, with a length of 2591 mm. Its 22 mm top width, 14 mm height and 40° angle identify it as a wrapped classical belt for drives that use this profile and length. Use these three dimensions to confirm the belt matches the drive before you order.
The C profile sets the cross-section: 22 mm across the top and 14 mm high, with a 40° angle. The length is 2591 mm, so the belt is intended for a drive whose sheave spacing and pulley diameters suit that datum length. When the old belt is worn or the marking is unreadable, measure the top width, height and length and compare them to these values.
The P-C102 belongs to the Movendis Classical Wrapped V-Belts series. It is a classical V-belt, not a narrow wedge, cogged, banded or synchronous belt, so it should be matched to a drive designed for the C profile and this length. If you are replacing a belt on a drive with multiple grooves, inspect all belts and sheaves before ordering.
To request a quote, send the part number P-C102, the quantity, and the drive or equipment details. If you are unsure whether this is the correct belt, send the marking from the back of the old belt and the pulley dimensions. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2591mm
Frequently asked questions
- What do the profile and length tell me about the P-C102?
- The C profile gives a 22 mm top width, 14 mm height and 40° angle. The length is 2591 mm. Together these define the belt's cross-section and datum length, so the replacement must match all three to fit the drive correctly.
- Can I use this belt on a drive that takes a different profile?
- No. The P-C102 is a classical V-belt in the C profile. A drive designed for another profile or length will not accept it correctly. Confirm the existing belt's marking and the pulley dimensions before ordering.
- What should I send to get a quote for the P-C102?
- Send the part number P-C102, the quantity you need, and the drive or equipment details. If you are unsure of the profile or length, include the marking from the back of the old belt and the pulley dimensions so we can confirm the match.