V-belt Movendis P-C99
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C99 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C99 and any equivalents.
The Movendis P-C99 is a classical wrapped V-belt in the C profile with a length of 2514 mm. It is built to the standard C cross-section: 22 mm top width, 14 mm height and a 40-degree angle. Use these figures to confirm it matches the belt you are removing.
Matching starts with the belt you take off. Read the marking on the back for the profile and length, then measure the top width and height across a straight section. The P-C99 is a C profile with a 22 mm top width and 14 mm height, and a 2514 mm length. If those match, the belt is the correct one for the drive.
Inspect the drive before fitting. Check sheave grooves for wear, alignment and any buildup, and confirm the sheaves are cut for a 40-degree C section. A worn groove will not hold the correct contact and will shorten belt life. Replace belts in sets where the drive uses more than one, so all belts carry the load evenly.
We carry the Movendis P-C99 and supply it to maintenance and purchasing teams across the United States, Canada, Mexico and South America. Send the part number, or the marking from the old belt, by WhatsApp or email and we will reply promptly to confirm the belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2514mm
Frequently asked questions
- How do I confirm the P-C99 is the right belt?
- Check the marking on the back of the old belt and measure its top width and height. The P-C99 is a C profile, 22 mm top width, 14 mm height, 2514 mm length and 40-degree angle. If your measurements match, it fits.
- Can I replace just one belt on a multi-belt drive?
- Where a drive runs more than one belt, replace the full set at the same time. Mixing a new belt with worn ones changes how the load is shared and can cause the new belt to fail early.
- What should I send to get a quote?
- Send the part number P-C99, or the marking and dimensions from the belt you are replacing, by WhatsApp or email. Include the quantity you need. We reply promptly and can help confirm the right belt.