V-belt Movendis P-A66
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A66 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A66 and any equivalents.
The Movendis P-A66 is a classical wrapped V-belt with an A profile and a 1676 mm length. Use the marking on the belt you are replacing to match profile and length before you order.
Start with the belt currently on the drive. Read the marking on the back: it should show the profile and the length. The P-A66 is an A profile belt, 13 mm across the top, 8 mm high, with a 40-degree angle, and it measures 1676 mm. If those values match what is printed on your old belt, the P-A66 is the correct size for that position.
If the marking is worn off, measure the old belt instead. Check the top width and the outside length, then compare them with the profile and length above. A belt that is too narrow sits low in the groove and slips; one that is too wide sits proud and wears the flanks. Confirm the profile first, then the length.
Send us the part number P-A66, or the marking from your old belt, by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent. Include the drive it runs on and the quantity you need so we can check the match.
Dimensions
- Section
- A
- Length
- 1676mm
Frequently asked questions
- How do I confirm the P-A66 fits my drive?
- Check the marking on the belt you are replacing. The P-A66 is an A profile classical V-belt with a 1676 mm length, a 13 mm top width, an 8 mm height and a 40-degree angle. If your old belt shows the same profile and length, it matches.
- What if the marking on my old belt is unreadable?
- Measure the old belt. Compare the top width and the outside length with the 13 mm top width and 1676 mm length of the P-A66. Profile and length are the two values that decide the fit.
- What should I send to request a quote?
- Send the part number P-A66, or the marking from your old belt, by WhatsApp or email. Add the quantity and the drive it runs on. Our team replies promptly and can confirm the right belt or suggest an equivalent.