V-belt Movendis P-A64.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A64.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A64.5 and any equivalents.
The Movendis P-A64.5 is a classical wrapped V-belt in profile A. It measures 1638 mm in length, with a 13 mm top width and 8 mm height, and a 40-degree angle. This page gives you the profile and length data to match your drive.
Profile and length are the two numbers that decide whether a classical V-belt fits. The A profile sets the cross-section: 13 mm across the top and 8 mm high, with a 40-degree angle that seats in a standard A-groove pulley. The 1638 mm length is the datum you compare against the old belt or the drive's required span. If both figures match your application, this Movendis belt is the correct profile and length.
A wrapped classical V-belt like the P-A64.5 is used on drives where the pulley groove is cut for an A-section belt. To confirm, read the marking on the back of the belt you are replacing and note the profile letter and the length. Then check the pulley groove width and the belt's top width against the 13 mm figure. Any mismatch in profile or length means the belt will not seat or tension correctly.
When you request a quote, send the part number P-A64.5 or the full marking from the old belt, together with the profile and length if they are readable. If the marking is worn, send the drive details and the measured length so the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1638mm
Frequently asked questions
- What do the profile and length mean on the P-A64.5?
- Profile A defines the cross-section: 13 mm top width, 8 mm height, and a 40-degree angle. The 1638 mm length is the belt's length. Both must match the drive for the belt to seat and run correctly.
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt and compare the profile letter and length. Then check the pulley groove against the 13 mm top width. If the profile or length differs, the belt will not fit.
- What information should I send with my quote request?
- Send the part number P-A64.5, or the full marking from the old belt. If the marking is not readable, include the profile, the measured length, and the drive details so the team can confirm the right belt or suggest an equivalent.