V-belt Movendis P-A63.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A63.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A63.75 and any equivalents.
The Movendis P-A63.75 is a classical wrapped V-belt in the A profile, 1620 mm long, with a 13 mm top width, 8 mm height and 40-degree angle. If you are replacing an existing A-section belt, this page covers the dimensions to confirm before you order.
Start by reading the marking on the belt you are removing. You are looking for an A profile and a 1620 mm length, which is what the P-A63.75 provides. The cross-section is 13 mm across the top and 8 mm high, so a worn belt that has stretched or a belt with a different profile will not match even if the length looks close.
Once you have the profile and length, check the drive itself. Inspect the sheave grooves for wear or debris and confirm the belt sits correctly in the groove. If the old belt is cracked, glazed or has exposed cords, replace it rather than reinstalling it. When a drive runs more than one belt, fit the full set at the same time so the load is shared evenly.
For a quote, send the part number P-A63.75, the quantity you need and the drive it goes on. If you are unsure whether this is the correct belt, send the marking from the old belt or the machine details, and the team can confirm the A profile and 1620 mm length or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1620mm
Frequently asked questions
- What dimensions identify the Movendis P-A63.75?
- It is an A profile classical wrapped V-belt, 1620 mm long, with a 13 mm top width, 8 mm height and 40-degree angle.
- How do I confirm it matches the belt I am replacing?
- Compare the profile and length on the old belt's back marking with the A profile and 1620 mm length of the P-A63.75. Also check the cross-section: 13 mm top width and 8 mm height.
- What should I send to request a quote?
- Send the part number P-A63.75 and the quantity. If you want confirmation, include the marking from the old belt or the drive details, and the team can verify the profile and length.