V-belt Movendis P-A68
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A68 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A68 and any equivalents.
The Movendis P-A68 is a classical wrapped V-belt in the A profile, with a 1725 mm length, 13 mm top width, 8 mm height and a 40° angle. It is used on industrial drives where a standard classical V-belt is specified. Confirm fit by matching the profile and the length to the old belt.
Classical wrapped V-belts like this one are found on fans, pumps, compressors and other general industrial drives. The A profile is a common cross-section, and the 1725 mm length is the dimension to check first. The 13 mm top width, 8 mm height and 40° angle define the cross-section.
To confirm fit, read the marking on the back of the old belt. It will show a profile letter and a length. If it reads A and 1725 mm, the P-A68 matches. If the profile is different, the belt will not seat correctly in the pulley groove. Measure the outside length or the pitch length only as a check against the marking.
When you request a quote, send the part number P-A68 and the quantity. If you are replacing a belt on a drive with multiple belts, note that all belts on the same drive should be replaced as a set. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1725mm
Frequently asked questions
- How do I confirm that the Movendis P-A68 fits my drive?
- Check the marking on the back of the old belt. It should show an A profile and a 1725 mm length. Also confirm the cross-section: the P-A68 has a 13 mm top width, 8 mm height and 40° angle.
- What should I send to get a quote for this belt?
- Send the part number P-A68 and the quantity you need. If you have the old belt, a photo of the marking on the back helps confirm the profile and length.
- Can I replace just one belt on a multi-belt drive?
- For drives using more than one belt, it is good practice to replace all belts on that drive at the same time. This helps keep the load even across the set.