V-belt Movendis P-A67
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-A67 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-A67 and any equivalents.
The Movendis P-A67 is a classical wrapped V-belt with an A profile and a 1700 mm length. The 13 mm top width, 8 mm height and 40-degree angle define how it seats in the pulley groove. Use these dimensions to confirm the belt matches the drive before you install it.
Profile and length are the two numbers that matter most when you select a classical V-belt. The A profile sets the cross-section: 13 mm across the top, 8 mm high, with a 40-degree angle that fits standard A-section pulleys. The 1700 mm length is the datum you compare against the old belt or the drive specification. If either figure is off, the belt will not run correctly.
The P-A67 is a wrapped classical V-belt, not a narrow wedge, cogged or banded design. That distinction matters when you inspect the drive: check that the pulley grooves are clean and unworn, and that the belt sits at the correct depth. A wrapped classical belt like this one is commonly used on general industrial drives where the original specification calls for an A-profile belt.
When you request a quote, send the part number P-A67 and confirm the profile and length you need. If you are replacing a belt that has worn markings, measure the top width and the outside length, or send a photo of the back of the belt. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1700mm
Frequently asked questions
- What do the profile and length tell me about the P-A67?
- The A profile gives a 13 mm top width, 8 mm height and 40-degree angle, so it fits standard A-section pulleys. The 1700 mm length is the dimensional reference you match to the drive.
- How do I confirm this belt fits my drive?
- Check the old belt marking or measure the top width and length. The P-A67 is an A-profile belt at 1700 mm, so those are the figures to compare before ordering.
- What should I send for a quote?
- Send the part number P-A67, or the profile and length from the old belt. A photo of the back of the belt also helps confirm the correct replacement.