V-belt Gates SPZ 722 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 722 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 722 MN and any equivalents.
The Gates SPZ 722 MN is a narrow wedge V-belt from the Super HC MN series. Its SPZ profile and 722 mm length identify it for drives specified to that section and center distance. Use this page to confirm the belt against your drive before requesting a quote.
Profile and length are the two dimensions that locate this belt. The SPZ section places it in the narrow wedge family, with a 9.7 mm top width, 8 mm height and 40 degree angle. The 722 mm length is the datum to match against the old belt or the drive specification.
Narrow wedge belts run in smaller pulleys and transmit more power per belt width than classical V-belts of comparable section. When several belts run in matched grooves, replace them as a set so the load stays evenly divided.
The marking on the back of the belt is the fastest way to confirm a match. Read the profile and length from the old belt, note the part number, and send it by WhatsApp or email with the quantity. We carry Gates and can help confirm the correct belt for your drive.
Dimensions
- Section
- SPZ
- Length
- 722mm
Frequently asked questions
- What do the SPZ profile and 722 mm length tell me?
- They identify the belt section and its length. SPZ is a narrow wedge section measuring 9.7 mm across the top and 8 mm high with a 40 degree angle. The 722 mm length is what you match to the drive or the belt being replaced.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt. If it shows SPZ and 722, this belt matches. If the marking is worn, measure the top width and the outside length and send those values with a photo.
- What should I send to request a quote?
- Send the part number SPZ 722 MN, the quantity, and any drive details you have, such as the pulley diameters or the application. We reply by WhatsApp or email and can help confirm the belt or suggest an equivalent.