V-belt Gates SPZ 710

GATES SPZ 710 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 710 and any equivalents.

The Gates Super HC SPZ 710 is a narrow wedge V-belt with an SPZ profile and a 710 mm length. Its 9.7 mm top width, 8 mm height and 40° angle identify it as a specific size within the Super HC line. To confirm you are ordering the correct belt, start by reading the marking on the back of the old belt.

The marking on the back of a belt usually carries the profile and length, and in this case that would be SPZ and 710. Check that the characters match exactly before you request a quote. If the old belt is worn or the marking is faint, measure the top width and height where the belt is still intact and compare them with 9.7 mm and 8 mm.

The same size is also listed under Optibelt SPZ 710, so you may see that reference when you look at the drive. We carry the Gates Super HC SPZ 710. Send the part number, the quantity you need and a photo of the back marking if it helps, and our team will confirm the belt or suggest an equivalent.

Narrow wedge V-belts like this SPZ profile are used where a compact drive needs to transmit power through a smaller cross-section. When you replace one, inspect the sheave grooves for wear and make sure the new belt sits at the correct height in the groove. If the drive uses multiple belts, replace them as a set so the load stays even.