V-belt Gates SPZ 710 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 710 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 710 MN and any equivalents.
This Gates SPZ 710 MN belt is a narrow wedge V-belt in the Super HC MN series. The SPZ profile and 710 mm length identify the drive size, while the 9.7 mm top width, 8 mm height and 40° angle define the cross-section. Use these values to match an existing belt or confirm the replacement for your drive.
The SPZ profile is a narrow wedge section, so it fits pulleys designed for this profile rather than a classical V-belt. The 710 mm length is the datum length for the belt. Together, the profile and length are the two dimensions you need to select the correct belt for a drive.
The cross-section is 9.7 mm at the top, 8 mm high, with a 40° angle. These dimensions determine how the belt seats in the pulley groove. When you check a drive, confirm the pulley profile and the belt length before ordering.
To request a quote, send the part number SPZ 710 MN, the quantity, and any drive details you have. If you are replacing a belt on an existing drive, the marking on the back of the old belt is the fastest way to confirm the profile and length.
Dimensions
- Section
- SPZ
- Length
- 710mm
Frequently asked questions
- What do the SPZ profile and 710 mm length mean for my drive?
- SPZ is the narrow wedge profile, and 710 mm is the belt length. You need both to match the belt to the pulley groove and the drive center distance.
- Can I use this belt to replace another SPZ 710 belt?
- If your drive uses an SPZ profile and a 710 mm length, this belt is the correct size. Always confirm the profile and length against the old belt or the drive specifications.
- What information should I send with my quote request?
- Send the part number SPZ 710 MN, the quantity you need, and any details about the drive or the old belt marking. That helps us confirm the right belt for your application.