DBH 9626 radial shaft seal — 100 x 125 x 15
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9626 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9626 and any equivalents.
A rotary shaft seal is a small, low-cost component that decides whether oil stays in the sump and dirt stays out. The DBH 9626 is built for a 100 mm shaft, a 125 mm housing bore and a 15 mm width, and its Lr configuration means one sealing lip backed by a spring. MR Industrial Accessories LLC supplies this brand and can help you confirm the size or find a substitute before you install anything.
Read the numbers in this order: shaft 100 mm, housing bore 125 mm, width 15.00 mm. The first figure is the diameter the lip rides on, the second is the bore the outer case presses into, and the third is the space available in the housing. All three have to match the equipment you are working on. If one of them is off, the seal will not seat or will not contact the shaft correctly.
You will find this seal on gearboxes, centrifugal pumps, electric motors, rollers and other power transmission equipment where a shaft exits a lubricated housing. In dirty environments it does two jobs at once: it holds the lubricant in and keeps dust, wash water and chips out. It is often installed alongside deep groove ball bearings or tapered roller bearings on equipment that runs continuously.
Selection goes beyond the three dimensions. Shaft speed, operating temperature and the lubricant in use all affect how the seal performs. An Lr lip with a spring is suited to shafts that are polished and of medium hardness. A scored or worn shaft surface will not give the new lip a clean track to run on. During installation, coat the lip with lubricant, make sure the spring stays in place, and drive the seal in with a tube or shim that contacts the outer edge, not the lip.
If the DBH 9626 is not the right fit, we can search for an equivalent within the same radial shaft seal category. Send the old part number, caliper readings, or a photo of the seal and the housing. The more detail you provide, the quicker we can confirm a match.
To request a quote, message us on WhatsApp or by email with part number 9626 and the dimensions. We reply promptly and can suggest equivalents or help you choose the right seal for your equipment.
Dimensions
- Shaft (d)
- 100mm
- Housing bore (D)
- 125mm
- Height (h)
- 15.00mm
- Design
- Lr
Frequently asked questions
- What are the dimensions of the DBH 9626 seal?
- Shaft 100 mm, housing 125 mm, width 15.00 mm. Those three figures define the installation, so check them against the shaft, the bore and the housing depth before ordering.
- How do I know if the 9626 seal replaces the one I have installed?
- Measure the shaft diameter, the housing bore and the width with a caliper. If you get 100, 125 and 15 mm, it will fit. If any figure differs, contact us and we will look for an equivalent.
- What does the Lr design mean on this seal?
- Lr indicates a radial shaft seal with a single lip and a spring, the usual configuration for rotating shafts in gearboxes, pumps and motors. If your application involves high pressure or speed, tell us so we can review other options.