DBH 9628Vit radial shaft seal — 47.6 x 57.15 x 5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9628Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9628Vit and any equivalents.
When a rotating shaft needs to keep lubricant in and contaminants out, the DBH 9628Vit radial shaft seal is a compact solution. It press-fits into the housing and rides on the shaft, with an oil film that maintains the sealing edge. The Mz-R design and its dimensions—shaft 47.60 mm, housing 57.15 mm, height 5.00 mm—make it a common replacement in gearboxes, pumps and speed reducers where space is limited.
This seal belongs to the DBH line and carries the code 9628Vit. Its size is defined by three measurements: shaft diameter 47.60 mm, housing bore 57.15 mm and overall height 5.00 mm. The Mz-R configuration is a single lip with a spring, intended to retain oil or grease in one direction of rotation. The code structure helps you find it in the catalog and compare it with similar options.
Typical applications include centrifugal pumps, gearboxes, electric motors, compressors and transmission units where a shaft turns inside a crankcase. They also appear in equipment exposed to moderate dust or splashing, such as industrial washers or road machinery. Because the height is only 5.00 mm, it fits into narrow housings where a taller seal would not seat properly.
During installation, make sure the shaft and housing are clean and free of burrs or drag marks. Apply the same oil or grease used in the machine to the lip before pressing the seal in. Use a flat driver that contacts the outer diameter, never the lip. If the shaft is worn, an offset lip may be a better choice. Selection also depends on speed, temperature and the fluid being sealed.
If you need an equivalent, provide the code 9628Vit or the three dimensions. With that information we can review alternatives within the DBH line and other brands we supply. We can also advise whether a taller seal will fit your housing or if a different lip design suits the direction of rotation and lubricant type.
MR Industrial Accessories supplies the DBH brand as part of its seals and oil seals range. To confirm this size or discuss a specific application, send the part number via WhatsApp or email and our team will reply with a quote and any assistance you need.
Dimensions
- Shaft (d)
- 47.6mm
- Housing bore (D)
- 57.15mm
- Height (h)
- 5.00mm
- Design
- Mz-R
Frequently asked questions
- What are the dimensions of the DBH 9628Vit seal?
- The seal has a 47.60 mm shaft diameter, a 57.15 mm housing bore and a 5.00 mm height. Verify these measurements against your equipment before installation.
- What does the Mz-R design indicate?
- Mz-R denotes a single-lip seal with a spring, designed to retain lubricant in one direction of rotation. It is common in enclosed crankcases with a rotating shaft. Contact us if your application has special requirements.
- How can I request a quote or an equivalent?
- Send the code 9628Vit and the shaft, housing and height dimensions of your equipment via WhatsApp or email. We will quote the DBH seal or suggest a compatible alternative from the brands we carry.