DBH 9624 radial shaft seal — 49.2 x 62.5 x 8/13

DBH 9624 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9624 and any equivalents.

The DBH 9624 is a radial lip seal engineered to keep lubricants in and contaminants out around rotating shafts. With a shaft diameter of 49.20 mm, a housing bore of 62.50 mm, and a height of 8.00/13.00 mm, it fits common industrial housings in gearboxes, pumps, and power transmission assemblies. MR supplies this seal and helps you confirm it matches your equipment before you order.

This seal belongs to the DBH line and carries part number 9624. Its key dimensions are: shaft 49.20 mm, housing 62.50 mm, height 8.00/13.00 mm, with an A 190 design. The A 190 configuration uses a metal case and a single sealing lip, intended for press fitting into a cylindrical bore. Always check these measurements against your shaft and housing before replacement.

Radial shaft seals like the DBH 9624 are used wherever a rotating shaft must be sealed against oil or grease loss and the entry of dust or moisture. Typical installations include gearboxes, centrifugal pumps, electric motors, conveyor rollers, and speed reducers. They are also found in agricultural and industrial machinery where lubrication must stay contained under demanding conditions.

For proper selection and installation, the shaft diameter must fall within the recommended tolerance for radial seals, and the surface finish must be smooth enough to avoid lip damage. The housing should be cylindrical and free of burrs. Press the seal in square to the shaft using a tool that contacts only the metal edge, never the lip. Lubricate the lip before installation and confirm the spring is seated correctly.

If you need an equivalent, send us the complete part number, the shaft, housing, and height dimensions, and a photo of the original seal. With that information we can look for an alternative within the DBH line or from another brand we supply, matching the dimensions and design type. Avoid guessing with approximate sizes—a seal that is slightly off will fail quickly.

To request a quote for the DBH 9624, message us on WhatsApp with part number 9624 and the quantity you need. MR responds with options that fit your equipment and can advise on installation and care for maximum seal life.