DBH 9625Vit radial shaft seal — 30 x 52 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9625Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9625Vit and any equivalents.
The DBH 9625Vit is a radial shaft seal with a single lip and spring, built to keep oil or grease in and dust and water out of assemblies that turn on a shaft. Its size is given as shaft 30 mm, housing 52 mm, height 7.00 mm, and its A 262-R design suits lubricated rotating shafts. MR Industrial Accessories supplies this brand and can help you confirm the right seal for the job.
The code 9625Vit identifies this DBH seal. When you read the dimensions, the first figure is the shaft it runs on, the second is the bore it presses into, and the third is its height: shaft 30 mm, housing 52 mm, height 7.00 mm. The A 262-R designation points to a single sealing lip with a spring, a common choice for shafts that rotate under lubrication.
You will find seals like this one in gearboxes, centrifugal pumps, electric motors, compressors, and belt or chain drives. Their job is to hold lubricant where it belongs and to block outside contaminants, which helps bearings and gears reach their expected service life. Power transmission equipment and agricultural or industrial machinery with exposed rotating shafts also rely on them.
Before mounting, inspect the shaft for burrs or wear and make sure the housing bore is clean and undistorted. Coat the lip with the same oil or grease used in the equipment, then press the seal in squarely with a proper support tube. If the shaft shows a worn track, an auxiliary lip version may be worth considering. Speed, temperature, and lubricant type all affect the final selection.
Need an equivalent or a different size? Send the code 9625Vit, or the current shaft, housing, and height measurements, along with the application details, by WhatsApp or email. The team can cross to the same seal in another brand or point you to alternatives in the series, and replies come back promptly.
MR Industrial Accessories handles seals, bearings, power transmission components, and lubrication products. If this DBH 9625Vit seal fits your equipment, pass along the code and the team will prepare a quote. They can also walk you through installation or suggest a replacement if this size is not the one you need.
Dimensions
- Shaft (d)
- 30mm
- Housing bore (D)
- 52mm
- Height (h)
- 7.00mm
- Design
- A 262-R
Frequently asked questions
- What are the dimensions of the DBH 9625Vit seal?
- It is sized for a 30 mm shaft, a 52 mm housing bore, and a 7.00 mm height. Those three figures match the 9625Vit designation, so verify them against your equipment before ordering.
- What applications is this seal suitable for?
- It fits rotating shafts in gearboxes, pumps, electric motors, and transmissions. The A 262-R single-lip design retains lubricant and keeps dust or water out when it is installed correctly and the shaft surface is in good condition.
- How do I request a quote or an equivalent?
- Send the code 9625Vit or your seal dimensions by WhatsApp or email. The team will quote it and, if needed, look for an equivalent in another brand within the same series, and can also advise on mounting.