DBH 9074Vit radial shaft seal — 18 x 35 x 7

DBH 9074Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9074Vit and any equivalents.

A radial shaft seal such as the DBH 9074Vit sits in the housing bore and wipes against the rotating shaft, holding lubricant in and keeping dust, water and particles out. Its size is 18 mm at the shaft, 35 mm at the housing and 7 mm in height, with Lx design. That makes it a compact seal for small rotating assemblies, and MR supplies this brand and helps you verify the size before quoting.

The code to order is 9074Vit, a DBH radial shaft seal. Read the size in the order shaft, housing, height: shaft 18 mm, housing 35 mm, height 7.00 mm. The Lx design describes a single lip with a metal case. This is a sealing part for rotary shafts only, not for back-and-forth movement or for high-pressure service.

Seals in this size range turn up in small centrifugal pumps, low-power electric motors, compact gearboxes, gear cases, compressors and power transmission equipment, as well as machine tools, washing equipment and irrigation systems. In each case the seal separates the lubricated side from the surrounding environment.

Correct fitting starts with the shaft: check its dimensions and surface finish, and remove burrs or marks that could cut the lip. The housing bore should be clean, undamaged and at the right diameter. Press the seal in straight rather than at an angle, using a tube or spacer that contacts the case, not the lip. Coat the lip with the same oil or grease the equipment uses before installation. Where the shaft is already worn, a seal with the lip in a different position can be an option.

For an equivalent, send part number 9074Vit or the dimensions 18 x 35 x 7 mm and tell us the equipment it fits. We then check alternatives in the DBH line or in other brands we carry, confirming everything against the manufacturer's data sheet. Sometimes a different height or a double-lip version works if there is room.

To request a quote for this DBH 9074Vit oil seal, message us on WhatsApp with the part number or the dimensions. MR helps you get the right part; if two sizes look possible, send a photo of the shaft and housing and we will review it with you.