DBH 9073 radial shaft seal — 16 x 35 x 12

DBH 9073 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9073 and any equivalents.

The DBH 9073 is a radial shaft seal that keeps lubricant contained and blocks outside contaminants from reaching a rotating shaft. It fits a 16 mm shaft, a 35 mm housing bore and a 12 mm height, and presses into gearbox housings, covers and reducer bodies. In the Lx design, a spring-loaded lip stays in contact with the shaft. As a wear part, it is replaced once leakage or contamination shows up.

This oil seal carries the DBH brand and part number 9073. Shaft 16 mm, housing 35 mm, width 12.00 mm. The Lx configuration is a single lip with a spring, made for lubricated rotating shafts. The lip rides on the shaft while the spring holds it against the surface, and the outer body seats in the bore. It comes from the standard catalog rather than a custom build.

You will find seals like the DBH 9073 in gearboxes, electric motors, pumps, mixers, conveyors and other power transmission assemblies. They hold oil or grease in and keep dust, wash water and chips out, acting as the first line of defense in dirty environments. Fan shafts, rollers and machine tools with continuous rotation are common applications as well.

When choosing a seal, match the shaft diameter, housing bore and available height. The shaft surface should be ground and free of burrs, since a mark or worn track on the sealing area will leak even with a new seal. Lubricate the lip before pressing it in and use a tube or bushing to protect it during installation. Make sure the spring faces the fluid side. A scored shaft may call for a wear sleeve.

For an equivalent, send part number 9073 along with the shaft, housing and height measurements. A photo of the old seal or the assembly drawing works too. With that information we check the DBH line and the other brands we supply. If the Lx design does not fit your application, we can point you to the variant that matches your lubricant and rotation speed.

MR Industrial Accessories supplies the DBH brand within its range of seals and oil seals. If the seal is on a machine that is running, address the leak before it worsens: send the part number by WhatsApp or email for a quote. We can also walk through the installation with you so the replacement performs as expected.