DBH 9074 radial shaft seal — 18 x 35 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9074 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9074 and any equivalents.
The DBH 9074 is a radial shaft seal built for shafts with an 18 mm diameter. It fits a 35 mm housing bore and stands 7 mm tall. Its job is to keep lubricant in and contaminants out, protecting bearings and bushings in pumps, motors, gearboxes and other rotating equipment.
This seal carries the dimensions 18.00 mm shaft, 35.00 mm bore and 7.00 mm height. The Lx design uses a single lip with a spring, suited for permanently lubricated rotating shafts. When you order, reference code 9074 or the 18x35x7 size. The lip must ride on a smooth shaft surface, free of nicks or wear, so inspect it before installation.
You will find this size in small centrifugal pumps, low-power electric motors, gear reducers, compressors, fans and belt- or chain-driven equipment. It also fits agricultural machinery, washers and hydraulic systems where oil or grease retention matters. The seal works as a dynamic barrier between shaft and housing, and its life depends on clean installation and proper lubrication.
For installation, clean the housing and shaft, check for burrs, and lubricate the lip with the system fluid. Press the seal in square to the shaft, using a tube or spacer that contacts the outer ring only. If the shaft shows wear, a seal with an extra lip may help. Selection also hinges on speed, temperature and fluid type—confirm these against the manufacturer's data before quoting.
Need an equivalent? Send code 9074 or the dimensions 18x35x7 via WhatsApp, along with a photo of the old part or housing drawing if available. MR Industrial Accessories LLC will compare options in the DBH line and other brands we supply, then recommend the best fit for your equipment.
Dimensions
- Shaft (d)
- 18mm
- Housing bore (D)
- 35mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9074 oil seal?
- The DBH 9074 has an 18.00 mm shaft diameter, a 35.00 mm housing bore and a 7.00 mm height. Use these dimensions or the 9074 code to identify the part. If your shaft or housing differs, ask us about alternatives.
- What applications suit this oil seal?
- It suits rotating shafts that need to retain oil or grease and block contaminants. Typical uses include pumps, motors, gear reducers, compressors and transmission equipment. Final selection depends on speed, temperature and fluid, which we verify before quoting.
- How do I request a quote or an equivalent?
- Message us on WhatsApp with code 9074 or the dimensions 18x35x7. A photo of the old part or housing drawing helps. MR Industrial Accessories LLC will send a quote and, if needed, suggest equivalents from the brands we supply.