DBH 9075 radial shaft seal — 20 x 35 x 6
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9075 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9075 and any equivalents.
The DBH 9075 is a radial shaft seal that keeps lubricant in and contaminants out where a shaft turns inside a housing. Its dimensions are 20.00 mm shaft, 35.00 mm housing and 6.00 mm height. The Lx design has a single lip and a metal case for press fitting. This seal is a wear item in motors, pumps, gearboxes and similar equipment, and replacing it when it starts to leak avoids bigger repairs.
The part number 9075 identifies a DBH oil seal. In the size designation, the shaft diameter (d) is 20.00 mm, the housing bore (D) is 35.00 mm and the height (h) is 6.00 mm. The Lx code means one sealing lip with a metal outer case, made to be pressed into a cylindrical housing. Use the DBH number to find the seal in the catalog and check it against the part you are removing.
You will find this seal in electric motors, centrifugal pumps, gearboxes, compressors, mixers and belt or chain drives, as well as in farm machinery, roller conveyors and process lines. Its job is always the same: hold oil or grease on the lubricated side and keep dust and water from getting in.
When selecting a replacement, confirm that the shaft and housing dimensions match the original. The lip must contact a shaft surface that is free of grooves or deep wear. If a groove has formed, a seal with an offset lip or a repair sleeve may be needed. During installation, coat the lip with the lubricant used in the equipment, keep the seal square to the shaft, and apply force only to the outer ring, not to the lip.
To request a quote for part number 9075, send the three dimensions of the old seal: shaft, housing and height. With that information we can locate an equivalent in DBH or another brand we supply. We can also tell you whether the Lx design fits your application or if a different lip profile or material is a better choice.
If you already know the number 9075, message us on WhatsApp for a quote. If you are comparing two sizes, send a photo of the seal along with the shaft and housing measurements, and we will help you confirm the correct one before installation.
Dimensions
- Shaft (d)
- 20mm
- Housing bore (D)
- 35mm
- Height (h)
- 6.00mm
- Design
- Lx
Frequently asked questions
- How do I know if the Lx design is right for my application?
- The Lx design has a single lip and a metal case, which suits cylindrical housings and shafts without grooves. For high speed, high temperature or heavy dust, another lip type or material may work better. Send us the operating conditions and we will advise.
- Can I get an equivalent for part 9075?
- Yes. Send the dimensions of the original seal (shaft, housing and height) or the old part number. We will look for an equivalent in DBH or another brand we supply and send a quote on WhatsApp.
- What are the dimensions of the DBH 9075 oil seal?
- The DBH 9075 has a 20.00 mm shaft diameter, 35.00 mm housing diameter and 6.00 mm height. These are the three dimensions to compare with the seal you are replacing. If the shaft or housing is worn, check before installing.