V-belt Dayco BP65
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP65 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP65 and any equivalents.
The Dayco BP65 is a classical wrapped V-belt with a B profile and a length of 1727.2 mm. To match it to the belt being replaced, compare the profile and the length marked on the old belt.
A B profile belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. The Dayco BP65 carries those dimensions and a length of 1727.2 mm. When reading a worn belt, look for the profile letter and the length on the back; if the marking is gone, measure the outside length and confirm the cross-section before ordering.
Classical wrapped V-belts are used on industrial drives where the sheave groove matches the belt cross-section. The B profile sits in a B groove. Check the sheave for wear, alignment and any debris that could affect belt seating. If the drive runs multiple belts, replace them as a set so the load stays shared evenly.
For a quote, send the part number BP65 or the details from the old belt: profile B, length 1727.2 mm, top width 17 mm and height 11 mm. We carry the Dayco BP65 and can confirm it against the belt you are replacing.
Dimensions
- Section
- B
- Length
- 1727.2mm
Frequently asked questions
- How do I confirm the Dayco BP65 is the right belt for my drive?
- Match the profile and length. The BP65 is a B profile belt with a length of 1727.2 mm. Compare those values with the marking or measurements of the belt being replaced.
- What measurements identify a B profile belt?
- A B profile belt has a top width of 17 mm, a height of 11 mm and a 40-degree angle. The Dayco BP65 uses this profile.
- What should I send to request a quote for the Dayco BP65?
- Send the part number BP65, or the profile and length from the old belt. If the marking is worn, provide the top width and height so we can help confirm the match.