V-belt Dayco BP64
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP64 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP64 and any equivalents.
The Dayco BP64 is a classical V-belt in the B profile, built for industrial drives that call for a wrapped classical belt. When you are replacing a belt, the part number on the old belt is the fastest way to match it. We carry this belt and quote it by part number.
To match the BP64 to the belt you are replacing, read the marking on the back of the old belt and compare it with the profile and length. This belt is a B profile with a 1701.8 mm length, a 17 mm top width, an 11 mm height and a 40° angle. If the marking on the old belt is worn or unreadable, measure the outside length and the top width of the belt you are removing and send those figures with your request.
Belts on the same drive wear at the same rate, so a single replacement can leave the others mismatched. If the drive runs more than one B profile belt, note how many the drive uses and order the same count. Send the part number, the quantity and any photos of the marking on the old belt by WhatsApp or email, and our team will confirm the BP64 or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 1701.8mm
Frequently asked questions
- How do I confirm the Dayco BP64 is the right replacement?
- Check the marking on the back of the belt you are replacing against the BP64 part number, then confirm the profile and length: B profile, 1701.8 mm length, 17 mm top width, 11 mm height, 40° angle. If the marking is unreadable, send the measured outside length and top width with your quote request.
- What information should I send with a quote request?
- Send the part number BP64, the quantity you need and any details from the belt you are replacing, such as the marking or measurements. Photos of the old belt and the drive help us confirm the match before we quote.
- Can I replace just one belt on a multi-belt drive?
- Belts on the same drive wear together, so replacing one alone can leave the set uneven. Count the belts on the drive and order the same quantity so the set matches.