V-belt Dayco BP63
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP63 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP63 and any equivalents.
The Dayco BP63 is a classical wrapped V-belt in a B profile. It measures 1676.4 mm in length, with a 17 mm top width, an 11 mm height and a 40 degree angle. Use these figures to match it against the belt you are replacing.
The most reliable way to identify a replacement is to read the marking on the back of the old belt and compare it with the profile and length above. A B profile belt at 1676.4 mm is not interchangeable with a different profile or a different length, even when the two look similar on the drive.
Before ordering, check the belt for cracks, glazing, missing cover or exposed cord, and inspect the sheaves for wear, rust or debris. If a drive runs more than one belt, replace the full set so the load stays evenly shared.
Send the part number, the profile and the length in millimeters, and a photo of the marking if it is worn. We carry the Dayco BP63 and can confirm it against your application.
Dimensions
- Section
- B
- Length
- 1676.4mm
Frequently asked questions
- How do I confirm the Dayco BP63 is the right belt?
- Compare the profile and length on the back of your old belt with the B profile and 1676.4 mm length of the BP63. If the marking is unreadable, measure the top width, height and outside length and send those figures with your request.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can leave the new one carrying more than its share of the load.
- What should I send to request a quote?
- Send the part number BP63, the profile and the length in millimeters, and the quantity you need. A photo of the belt marking helps us confirm the match before we reply.