V-belt Dayco BP61
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BP61 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BP61 and any equivalents.
The Dayco BP61 is a classical wrapped V-belt in the B profile. It measures 1625.6 mm in length, with a 17 mm top width, 11 mm height and a 40 degree angle. Classical wrapped V-belts like this one are commonly used on industrial drives where a single belt runs between two pulleys.
To confirm fit, read the marking on the back of the old belt and match the profile letter and the length. Then check the pulley groove: a B profile belt seats in a groove sized for a 17 mm top width. Measure the belt's outside length and compare it to 1625.6 mm. Also confirm the drive takes a single classical V-belt rather than a banded, cogged or narrow wedge belt.
Before ordering, inspect the pulleys for wear, alignment and buildup, and check the belt for cracks, glazing or missing cover. If a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Send the part number and the belt marking for a quote.
Dimensions
- Section
- B
- Length
- 1625.6mm
Frequently asked questions
- What do I need to send to get a quote for the Dayco BP61?
- Send the part number BP61, the profile letter B and the length 1625.6 mm. A photo of the marking on the back of the old belt also helps confirm the correct belt.
- How do I confirm this classical V-belt fits my drive?
- Match the B profile to the pulley groove and the 1625.6 mm length to the old belt. Check that the drive uses a single classical V-belt and not a banded, cogged or narrow wedge belt.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace the full set together. Mixing a new belt with worn belts can cause uneven loading and faster wear.