V-belt Stark SPZ 1162
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 1162 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1162 and any equivalents.
The Stark SPZ 1162 is a narrow wedge V-belt with an SPZ profile, a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. It is the belt to reach for when you are matching a drive that already runs an SPZ section. The same size is also listed under Mitsuboshi SPZ 1162 and Optibelt SPZ 1162.
Matching a replacement starts with the marking on the old belt. Look for the profile and the length, then confirm the SPZ section and the 1162 length against the Stark SPZ 1162. Check the top width of 9.7 mm and the height of 8 mm against the belt you are removing, and confirm the 40-degree angle. If the old belt is worn or the marking is gone, measure the top width and height at the widest point of the belt.
The same size is also listed under Mitsuboshi SPZ 1162 and Optibelt SPZ 1162, so you can compare what is on the shelf or in the storeroom. When you request a quote, send the part number Stark SPZ 1162 and the profile and length from the old belt. If you are unsure, send the belt marking or the drive details and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm the Stark SPZ 1162 is the right belt for my drive?
- Check the old belt for the SPZ profile and the 1162 length. Confirm the top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees. If the marking is unreadable, measure the top width and height and send those numbers with your quote request.
- Can I use another brand with the same size?
- The same size is also listed under Mitsuboshi SPZ 1162 and Optibelt SPZ 1162. Send the part number you have and the team can help confirm the right belt or suggest an equivalent.
- What should I send to get a quote?
- Send the part number Stark SPZ 1162, or the profile and length from the belt you are replacing. If you have the old belt, a photo of the back marking helps confirm the SPZ profile and the 1162 length.