V-belt Optibelt SPZ 1162
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1162 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1162 and any equivalents.
The Optibelt SPZ 1162 is a narrow wedge V-belt in the SPZ profile with a 1162 mm length. It is used in industrial drives where a compact cross-section is required. Confirming the marking on the belt being replaced is the most reliable way to select it.
To match this belt to the one being replaced, read the marking on the back of the old belt. The SPZ profile and the 1162 mm length must correspond. The belt has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle, so these dimensions should also be checked against the old belt or the drive pulley groove.
The same size is also listed under Stark SPZ 1162 and Mitsuboshi SPZ 1162. If the old belt is marked with one of those references, the Optibelt SPZ 1162 is the equivalent size to request. For a quote, send the part number and the quantity needed.
Before fitting a replacement, inspect the drive for worn pulleys, misalignment or damaged grooves. These conditions can shorten belt life. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
Dimensions
- Section
- SPZ
- Length
- 1162mm
Frequently asked questions
- How do I confirm this is the correct belt?
- Check the marking on the belt being replaced. The profile must be SPZ and the length must be 1162 mm. You can also compare the top width of 9.7 mm and the height of 8 mm.
- What information should I send for a quote?
- Send the part number Optibelt SPZ 1162 and the quantity required. If you have the old belt marking, include it so we can confirm the match.
- Can this belt be replaced individually?
- If the drive uses a single belt, it can be replaced on its own. On a multi-belt drive, replace all belts as a set to keep the load evenly distributed.