V-belt Mitsuboshi SPZ 1162
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1162 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1162 and any equivalents.
The Mitsuboshi SPZ 1162 is a narrow wedge V-belt built to the SPZ profile. It is intended for drives that use this profile and length. Before fitting a new belt, inspect the sheaves and the rest of the drive.
Check the sheave grooves for wear, burrs or debris. Worn grooves can shorten belt life even when the replacement is correct. Confirm that the sheave profile matches the SPZ dimensions of this belt: 9.7 mm top width, 8 mm height and a 40° angle. Misalignment between sheaves should be corrected before the belt is fitted.
The SPZ 1162 is listed at a length of 1162 mm. The same size is also listed under Stark SPZ 1162 and Optibelt SPZ 1162. If you are replacing an existing belt, read the marking on the back of the old belt and compare it with the profile and length above. Send us the part number and any marking details for a quote.
Dimensions
- Section
- SPZ
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, burrs or debris, confirm the groove profile matches the SPZ dimensions of this belt, and check sheave alignment. Correct any issues before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with the SPZ 1162. The profile is SPZ, the length is 1162 mm, the top width is 9.7 mm, the height is 8 mm and the angle is 40°.
- What do I need to send for a quote?
- Send the part number SPZ 1162 and any marking details from the old belt. If you have the drive or sheave information, include that as well so we can help confirm the right belt.