V-belt Stark SPZ 1000
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 1000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1000 and any equivalents.
The Stark SPZ 1000 is a narrow wedge V-belt in the SPZ profile. It measures 9.7 mm across the top, 8 mm in height and has a 40° angle. This page helps you match it to the belt you are replacing.
The most reliable way to match a belt is to read the marking on the back of the old belt. If it shows SPZ 1000, this Stark belt is the same profile and the same length. Check that the old belt has not stretched or worn so thin that its marking is hard to read; a caliper reading of the top width and height will confirm the SPZ profile.
If the old belt is unmarked, measure its top width and height. An SPZ belt is 9.7 mm wide and 8 mm high, with a 40° angle. The same size is also listed under Mitsuboshi SPZ 1000 and Optibelt SPZ 1000, so those are valid references when you compare what is on the drive.
For a quote, send the part number SPZ 1000 and the quantity you need by WhatsApp or email. If you are unsure between SPZ and another profile, include a photo of the old belt and the drive sheaves. We carry the Stark SPZ 1000 and can help confirm it is the right belt for your application.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm the Stark SPZ 1000 is the correct replacement?
- Look for the marking SPZ 1000 on the back of the belt you are replacing. If it matches, the profile and length are the same. You can also measure the old belt: the SPZ profile has a 9.7 mm top width, 8 mm height and a 40° angle.
- What if my old belt is marked with a different brand?
- The same size is also listed under Mitsuboshi SPZ 1000 and Optibelt SPZ 1000. If your belt carries one of those references, the Stark SPZ 1000 is the same profile and length.
- What information should I send to request a quote?
- Send the part number SPZ 1000 and the quantity you need by WhatsApp or email. If you want us to help confirm the profile, include a photo of the old belt and the drive sheaves.