V-belt Mitsuboshi SPZ 1000
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1000 and any equivalents.
The Mitsuboshi SPZ 1000 is a narrow wedge V-belt with an SPZ profile. The marking on the back of the belt gives you the profile and the length, which is the fastest way to confirm you are replacing the correct belt. We carry this belt and quote it by part number.
Start with the old belt. Read the marking on its back: it should show SPZ and 1000. That tells you the profile and the length, and it is the number to send when you request a quote. The SPZ profile is a narrow wedge, with a 9.7 mm top width, 8 mm height and a 40° angle.
If the old marking is worn or unreadable, measure the belt and check the drive before ordering. The same size is also listed under Stark SPZ 1000 and Optibelt SPZ 1000, so you can compare what is on the drive with what we carry. Send the part number, the quantity, and a photo of the marking if it helps.
For drives that run more than one belt, replace the full set at the same time. Mixed wear across a set changes how the belts load the sheaves. Confirm the SPZ profile and the 1000 length on every belt in the set before you install.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm the belt on my drive is an SPZ 1000?
- Read the marking on the back of the old belt. It should show SPZ and 1000. If it is worn, measure the top width and height and check the profile against the SPZ dimensions: 9.7 mm top width, 8 mm height and a 40° angle.
- What do I send to request a quote for this belt?
- Send the part number, Mitsuboshi SPZ 1000, along with the quantity you need. If you are replacing a set, include the number of belts on the drive. A photo of the old belt marking helps us confirm the profile and length.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark SPZ 1000 and Optibelt SPZ 1000. If your old belt carries one of those markings, send that number and we can help confirm the match.