V-belt Mitsuboshi SPZ 962
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 962 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 962 and any equivalents.
This Mitsuboshi SPZ 962 is a narrow wedge V-belt with an SPZ profile. It measures 9.7 mm across the top, 8 mm in height and has a 40° angle. Narrow wedge belts are common on compact, high-speed industrial drives where space is limited.
To confirm fit, check the old belt's back marking for the profile and length, and compare the SPZ profile with the pulley groove. The SPZ 962 should sit correctly in the groove without riding on the bottom. Measure the top width and height against the figures above if the marking is worn.
The same size is also listed under Optibelt SPZ 962, so you can compare what is on the drive before ordering. If you are replacing more than one belt on a multi-belt drive, replace the full set so the load stays even across the grooves.
For a quote, send the part number SPZ 962, the quantity, and a photo of the belt marking if you have one. If you are unsure of the profile, include the pulley groove width and the drive arrangement.
Dimensions
- Section
- SPZ
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height and 40° angle. The belt must match the pulley groove profile to seat properly.
- Can I use this belt to replace another brand?
- The same size is also listed under Optibelt SPZ 962. Compare the marking on your existing belt and confirm the pulley groove before replacing.
- What should I send to request a quote?
- Send the part number SPZ 962, the quantity you need, and a photo of the old belt's back marking if it is readable.