V-belt Stark SPZ 1010
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPZ 1010 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1010 and any equivalents.
The Stark SPZ 1010 is a narrow wedge V-belt for industrial drives. It has an SPZ profile, a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. This page helps you match it to the belt you are replacing.
Start by reading the marking on the old belt. You need the profile and the length: SPZ and 1010 mm. The SPZ profile is a narrow wedge section, so replacing it with a classic V-belt profile will not match the sheave groove. The same size is also listed under Gates SPZ 1010, which gives you a second reference to compare.
Next, check the belt against the drive. Confirm the top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees. A belt that has worn narrow or sits low in the groove may still carry the same marking, so compare the old belt with the Stark SPZ 1010 before ordering.
If the marking is unreadable, measure the top width and the outside length, then send those values with a photo of the drive. We carry the Stark SPZ 1010 and can confirm it against your part number or suggest an equivalent when the original is not clear. Send your quote request by WhatsApp or email.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I match the Stark SPZ 1010 to the belt I am replacing?
- Read the profile and length from the old belt. The Stark SPZ 1010 is an SPZ profile with a length of 1010 mm. If the old belt shows SPZ and 1010 mm, it is the same size.
- What are the dimensions of the Stark SPZ 1010?
- The belt has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle.
- Can I use a different brand with the same size?
- The same size is also listed under Gates SPZ 1010. Send us the part number and we can help confirm the right belt or suggest an equivalent.