V-belt Stark SPB 2410
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 2410 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2410 and any equivalents.
The Stark SPB 2410 is a narrow wedge V-belt in the SPB profile, with a 16.3 mm top width, 13 mm height and a 40 degree angle. Before this belt goes on the drive, the sheaves and the rest of the drive are worth a look. This page covers what to check and what to send when you request a quote.
A new belt on worn or misaligned sheaves will not run as it should. With the old belt off, inspect the groove flanks for wear, ridges and embedded debris, and check that the sheaves are clean and turn freely. Confirm the sheave grooves match the SPB profile and the 16.3 mm top width, and check alignment between the driving and driven sheaves so the belt runs true in the grooves.
The Stark SPB 2410 carries a 13 mm height and a 40 degree angle. If the drive runs more than one belt, replace the set together so the load stays even across the grooves, and keep the old belt for comparison. The same size is also listed under Mitsuboshi SPB 2410 and Optibelt SPB 2410.
To request a quote, send the part number Stark SPB 2410, the quantity you need, and the SPB profile. If you are matching a belt already in service, a photo of the marking on the back of the belt and the drive arrangement helps us confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
Frequently asked questions
- What are the dimensions of the Stark SPB 2410?
- It is a narrow wedge V-belt in the SPB profile with a 16.3 mm top width, 13 mm height and a 40 degree angle.
- Which sheave grooves does this belt fit?
- It is an SPB profile belt, so the sheave grooves should match the SPB profile and the 16.3 mm top width. Check the groove flanks for wear before fitting.
- What should I send with my quote request?
- Send the part number Stark SPB 2410 and the quantity. For a belt already in service, a photo of the marking on the back of the belt and the drive arrangement helps us confirm the right belt or suggest an equivalent.