V-belt Stark SPB 2360
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPB 2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2360 and any equivalents.
The Stark SPB 2360 is a narrow wedge V-belt with an SPB profile. This page covers how to match it to the belt you are replacing, using the profile and length marked on the old belt.
Start with the belt currently on the drive. Read the marking on the back: it should show the SPB profile and a length. The Stark SPB 2360 has a top width of 16.3 mm, a height of 13 mm, a 40 degree angle and a length of 2360 mm. If the old belt carries those same figures, this is the size to quote.
If the marking is worn or missing, measure the top width and the outside length of the old belt and compare them with the values above. A belt that is the same profile but a different length will not sit correctly in the pulley grooves. The same size is also listed under Optibelt SPB 2360 and Gates SPB 2360, so you can note those when checking against a drive that uses another brand.
When you request a quote, send the part number Stark SPB 2360, the quantity, and a photo of the old belt marking if it is readable. Our team can confirm the SPB profile and 2360 mm length and help you identify the correct belt for the drive.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm the Stark SPB 2360 matches my old belt?
- Check the back of the old belt for the SPB profile and the length. The Stark SPB 2360 is 2360 mm long, with a 16.3 mm top width, 13 mm height and 40 degree angle. If those match, it is the same size.
- What should I send to request a quote?
- Send the part number Stark SPB 2360, the quantity you need, and a photo of the old belt marking if it is readable. We will confirm the profile and length and reply by WhatsApp or email.
- The marking on my old belt is unreadable. What can I do?
- Measure the top width and the outside length of the old belt. Compare those measurements with the 16.3 mm top width and 2360 mm length of the Stark SPB 2360. If they are close, send the measurements and a photo, and we can help confirm the size.