V-belt Mitsuboshi SPB 2410
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPB 2410 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2410 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is the most reliable starting point. This page covers the Mitsuboshi SPB 2410, a narrow wedge V-belt with an SPB profile. Use the data below to confirm it matches your drive before requesting a quote.
The Mitsuboshi SPB 2410 is a narrow wedge V-belt. Its profile is SPB, with a top width of 16.3 mm, a height of 13 mm, and a 40° angle. The same size is also listed under Stark SPB 2410 and Optibelt SPB 2410, so those markings may appear on a belt already in service.
To match an existing belt, read the full marking on the back. Note the profile and the part number exactly as printed, then compare them with the values above. If the old belt is worn or the marking is unreadable, measure the top width and height and check the angle where possible. Send the part number or those dimensions for a quote.
Dimensions
- Section
- SPB
Frequently asked questions
- How do I confirm this belt matches my drive?
- Check the marking on the back of the old belt. If it reads SPB 2410, this belt matches. You can also verify the profile SPB, top width 16.3 mm, height 13 mm, and 40° angle against the old belt.
- What should I send for a quote?
- Send the part number SPB 2410, or the marking from the back of the old belt. If the marking is not clear, include the profile and dimensions you measured. We will confirm the belt or suggest an equivalent.
- Can you help if the old belt marking is hard to read?
- Yes. Send the profile and dimensions you can measure, such as top width and height. We can help confirm the right belt or suggest an equivalent based on that information.