V-belt Stark SPA 2332
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPA 2332 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2332 and any equivalents.
The Stark SPA 2332 is a narrow wedge V-belt with an SPA profile, a 12.7 mm top width, a 10 mm height and a 40 degree angle. Before you fit it, inspect the drive and sheaves so the new belt runs correctly from the start.
Check the sheave grooves for wear, burrs, dirt or oil. A worn groove lets the belt sit too deep and slip, while a damaged groove can cut the belt. Confirm the sheaves are aligned and the shafts do not move, then check the belt tensioning device works over its full range. Replace worn sheaves or damaged parts before fitting the Stark SPA 2332.
The same size is also listed under Mitsuboshi SPA 2332 and Optibelt SPA 2332. If you are matching an existing belt, read the marking on the back and compare the profile and length. Send the part number, the belt marking and a photo of the drive by WhatsApp or email, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- What should I check on the drive before fitting the Stark SPA 2332?
- Inspect the sheave grooves for wear, burrs, dirt or oil, confirm the sheaves are aligned, check the shafts for movement, and make sure the tensioning device works over its full range. Replace worn sheaves or damaged parts before fitting the belt.
- How do I confirm the Stark SPA 2332 is the right belt?
- Compare the profile and length with the marking on the old belt. The Stark SPA 2332 has an SPA profile, a 12.7 mm top width, a 10 mm height and a 40 degree angle. If you are unsure, send the part number and a photo of the drive by WhatsApp or email.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi SPA 2332 and Optibelt SPA 2332.