V-belt Stark SPA 2282
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPA 2282 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2282 and any equivalents.
The Stark SPA 2282 is a narrow wedge V-belt with an SPA profile. It measures 12.7 mm across the top, 10 mm high, and has a 40° angle. Before you install it, inspect the drive and sheaves so the new belt runs true and lasts.
Start by locking out the drive. Check sheave grooves for wear, rust, or embedded debris. A worn groove can let the belt sit too deep, causing slip and heat. Measure groove width with a sheave gauge if you have one. Confirm the sheaves are aligned with a straightedge or laser. Misalignment shortens belt life and can throw the belt.
The SPA 2282 also appears as Mitsuboshi SPA 2282 and Optibelt SPA 2282. If you are replacing an existing belt, read the marking on the back to confirm the profile and length. Send us the part number and a photo of the old belt. We carry Stark and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- What should I check before fitting a Stark SPA 2282?
- Inspect sheave grooves for wear, rust, or debris. Verify alignment with a straightedge. Replace badly worn sheaves before installing a new belt.
- How do I identify the belt on the drive?
- Look for the marking on the back of the belt. It should show the profile and length, such as SPA 2282. If it is worn off, measure the top width and height.
- What information do you need for a quote?
- Send the part number, SPA 2282, and the quantity. A photo of the old belt helps us confirm the profile and length.