V-belt Stark SPA 2300
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK SPA 2300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2300 and any equivalents.
The Stark SPA 2300 is a narrow wedge V-belt with an SPA profile. It measures 12.7 mm across the top, 10 mm in height and has a 40° angle. This belt is used in industrial drives where a compact, high-capacity V-belt is required.
Narrow wedge V-belts like the SPA 2300 are common on pumps, fans, compressors and other driven equipment. The SPA profile is a metric narrow section, so it fits pulleys machined for SPA grooves. The 40° angle and 10 mm height are standard for this profile and help the belt seat correctly in the pulley.
To confirm fit, check the old belt marking or measure the pulley groove. The belt should sit in the groove without bottoming out, and the top width should match the pulley opening. If the drive uses multiple belts, replace them as a set to keep tension even.
The same size is also listed under Mitsuboshi SPA 2300 and Optibelt SPA 2300. Send us the part number and any photos of the old belt or pulley marking, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
Frequently asked questions
- How do I confirm that the Stark SPA 2300 fits my drive?
- Check the marking on the old belt or measure the pulley groove. The SPA profile requires a pulley with an SPA groove. The belt top width is 12.7 mm, height is 10 mm and the angle is 40°. If these match your pulley and old belt, the SPA 2300 is the correct size.
- Can I use this belt in a drive that currently has a different brand?
- Yes, if the profile and length match. The same size is also listed under Mitsuboshi SPA 2300 and Optibelt SPA 2300. Always compare the profile, top width, height and angle to the original belt.
- What information should I send for a quote?
- Send the part number SPA 2300 and the quantity you need. If you are unsure, include a photo of the old belt marking or the pulley groove so we can help confirm the right belt or suggest an equivalent.