V-belt Stark C 101
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 101 and any equivalents.
The Stark C 101 is a classical V-belt with a C profile. It measures 22 mm across the top, 14 mm high, and has a 40-degree angle. If you are replacing a worn belt, the marking on the back is the fastest way to confirm you are specifying the same size.
Before you order, read the old belt. The back usually carries the profile and a length code. Match that marking to the C 101. The profile tells you the cross-section: C, 22 mm top width, 14 mm high, 40 degrees. If the old belt is worn or the marking is gone, measure the top width and height with a caliper and send those numbers with a photo.
The same size is also listed under Mitsuboshi C 101 and Optibelt C 101. If your drive uses more than one belt, replace the full set at the same time so the load stays even. Check the sheaves for wear, alignment, and any debris before you install the new belt.
Send the belt marking, the quantity, and a photo of the drive or the old belt by WhatsApp or email. We carry the Stark C 101 and will confirm the profile and length against your application.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the C 101 is the right belt?
- Read the marking on the back of the old belt. If it shows C 101, that is the size. If the marking is unreadable, measure the top width and height and send those values with a photo.
- What are the dimensions of the Stark C 101?
- It is a classical V-belt with a C profile: 22 mm top width, 14 mm height, and a 40-degree angle.
- What should I send for a quote?
- Send the belt marking, the quantity you need, and a photo of the old belt or the drive. We will confirm the C 101 and reply by WhatsApp or email.