V-belt Stark C 100
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK C 100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 100 and any equivalents.
The Stark C 100 is a classical V-belt in the C profile, with a 22 mm top width, 14 mm height and 40° angle. If you are replacing a belt on an existing drive, the marking on the old belt is the fastest way to match it. We carry this belt and quote by part number.
To match the belt being replaced, read the marking on the back of the old belt. Confirm the profile is C and the part number is C 100. Check that the top width is 22 mm, the height is 14 mm and the angle is 40° against the belt you are removing. If the old belt is worn or the marking is unreadable, measure the cross-section and compare it to these dimensions.
The same size is also listed under Optibelt C 100. If your drive uses more than one belt, inspect all belts on the drive and replace them as a set so the load stays even across the grooves. Check the sheaves for wear or debris before installing the new belt.
Send the part number C 100 by WhatsApp or email to request a quote. If you are unsure about the profile or size, include the old belt marking and the drive details, and we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Stark C 100 is the right belt for my drive?
- Check the marking on the belt being replaced. It should show the C profile and C 100. Verify the top width is 22 mm, the height is 14 mm and the angle is 40°. If the marking is gone, measure the old belt and compare it to these dimensions.
- What should I send to request a quote for the Stark C 100?
- Send the part number C 100 by WhatsApp or email. If you are replacing a belt and want us to confirm the match, include the marking from the old belt and the drive details.
- Is the same size listed under another brand?
- Yes, the same size is also listed under Optibelt C 100.