V-belt Optibelt C 100
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 100 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 100 and any equivalents.
The Optibelt C 100 VB is a classical V-belt with a C profile and a 2642 mm length. When you read the marking on the back of the old belt, C 100 is the part number to match. This page covers the dimensions and how to confirm the right belt for your drive.
The marking on a classical V-belt gives you the profile and the length in one line. On this belt, the profile is C and the length is 2642 mm. The top width is 22 mm, the height is 14 mm, and the angle is 40 degrees. If your old belt reads C 100, these are the dimensions to compare before ordering.
The same size is also listed under Stark C 100, so you may see that marking on a belt already in service. Check the belt for cracks, glazing, missing cords or uneven wear across the top width. Also inspect the sheaves for worn grooves, and replace belts in sets where the drive uses more than one belt.
To request a quote, send the part number C 100 along with the profile and length from the old belt. If the marking is worn or unreadable, send the drive details and a photo of the belt and sheaves. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2642mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows C 100, compare the profile C and the 2642 mm length with this Optibelt belt. The top width is 22 mm and the height is 14 mm.
- What should I send to request a quote?
- Send the part number C 100, or the full marking from the old belt, by WhatsApp or email. If the marking is not clear, include the drive details and a photo of the belt and sheaves.
- Can you help if the old belt marking is unreadable?
- Yes. Send the drive information and photos of the belt and sheaves. We can help confirm the right belt or suggest an equivalent.