V-belt Mitsuboshi C 101
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 101 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 101 and any equivalents.
The Mitsuboshi C 101 is a classical V-belt in the C profile. To match it to the belt being replaced, read the marking on the old belt and confirm the C profile and the 101 length. The same size is also listed under Stark C 101 and Optibelt C 101.
Start with the profile. This belt has a C profile, a 22 mm top width, a 14 mm height and a 40° angle. Compare those dimensions with the belt you are removing. If the old belt is worn or the marking is unreadable, measure the top width and height across the cross-section.
Next, confirm the length. The C 101 designation places it in the C section at the 101 length. Check the number on the back of the old belt against the C 101 marking. If the old belt shows a different length or profile, send that number for a quote on the correct belt.
For a quote, send the part number C 101, the quantity, and the equipment or drive it fits. If you are replacing a set, include the number of belts on the drive. Photos of the old belt marking and the drive help confirm the match.
Dimensions
- Section
- C
Frequently asked questions
- How do I confirm the Mitsuboshi C 101 is the right replacement?
- Check the old belt marking for the C profile and the 101 length. Also compare the 22 mm top width, 14 mm height and 40° angle with the belt being replaced.
- What should I send to request a quote?
- Send the part number C 101, the quantity, and the equipment or drive it fits. If you are replacing a set, include the number of belts on the drive.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Stark C 101 and Optibelt C 101.