V-belt Stark 5V 1120
- Brand
- STARK
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and STARK: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
STARK 5V 1120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1120 and any equivalents.
This is a Stark 5V 1120 narrow wedge V-belt. To match it to the belt you are replacing, confirm the profile and the length on the old belt. The profile is 5V and the length is 1120 mm.
Start by reading the marking on the back of the belt you are replacing. You are looking for the profile and the length. If the old belt is marked 5V 1120, this Stark belt matches those two dimensions. The same size is also listed under Mitsuboshi 5V 1120, Optibelt 5V 1120 and Dayco 5V 1120.
If the marking is worn off, measure the top width and the outside length of the old belt and compare them to the profile and length above. Do not rely on a partial number or a similar-looking belt. A narrow wedge V-belt with the wrong profile or length will not sit correctly in the pulley grooves.
When you request a quote, send the part number 5V 1120 and the quantity you need. If you are replacing more than one belt on the same drive, send the part numbers for the full set so the team can confirm each one.
Dimensions
- Section
- 5V
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are removing. It should show the profile 5V and the length 1120 mm. If it does, this Stark 5V 1120 matches those dimensions.
- What if the marking on my old belt is unreadable?
- Measure the top width and the outside length of the old belt and compare them to the 5V profile and 1120 mm length. If you are unsure, send a photo of the old belt with your quote request.
- Can I order this belt under another brand name?
- The same size is also listed under Mitsuboshi 5V 1120, Optibelt 5V 1120 and Dayco 5V 1120. Send the part number you prefer and the team will confirm it.